The Evidence for LENR

“Over 2 decades with over 100 experiments worldwide indicate LENR is real, much greater than chemical…” –Dennis M. Bushnell, Chief Scientist, NASA Langley Research Center Low Energy Nuclear Reaction (LENR) using nickel and hydrogen is a clean, very very cheap, and super abundant new energy technology. It would be fair to say that it is the silver bullet for our current continual energy crisis – and as a consequence sounds too good to be true.
In November of 2009 the US Defense Intelligence Agency (DIA) published Defense Analysis Report DIA 8-0911-003 titled “Technological Forecast: Worldwide Research on Low-Energy Nuclear Reactions Increasing and Gaining Acceptance” ( http://www.lenr-canr.org/acrobat/BarnhartBtechnology.pdf ).
The paper gives a rundown of Low Energy Nuclear Reaction work being done around the world. Among other things it notes: “DIA assesses with high confidence that if LENR can produce nuclear-origin energy at room temperatures, this disruptive technology could revolutionize energy production and storage, since nuclear reactions release millions of times more energy per unit mass than do any known chemical fuel.”
“Energy density many orders of magnitude over chemical.” –Michael A. Nelson, NASA
Here is a detailed description of a LENR generator and formula that was producing energy over unity. In the March of 1994 US government contract F33615-93-C-2326 titled “NASCENT HYDROGEN: AN ENERGY SOURCE” ( www.lenr-canr.org/acrobat/GernertNnascenthyd.pdf ), “Anomalous heat was measured from a reaction of atomic hydrogen in contact with potassium carbonate on a nickel surface.”
This phenomenon (LENR) has been confirmed in hundreds of published scientific papers as is shown by this document titled “Tally of Cold Fusion Papers” ( http://lenr-canr.org/acrobat/RothwellJtallyofcol.pdf ). It gives readers a sense of the scale, variety, and sources of the material available about this subject. It also gives some indication of how much has been published on cold fusion, and where they were published.
Of special note is a PowerPoint presentation by George Miley of the University of Illinois ( https://netfiles.uiuc.edu/mragheb/www/NPRE%20498ES%20Energy%20Storage%20Systems/Nuclear%20Battery%20using%20Clusters%20in%20Nanomaterials.pptx ), who has successfully replicated the LENR “cold fusion” reaction.
In the ebook “Secrets of E-Cat,” (Consulente Energia Publisher, 145 pages, 68 illustrations, Pdf format, 7 €, http://www.consulente-energia.com/cold-fusion-book-secrets-e-cat-by-mario-menichella-secret-ecat-andrea-rossi-focardi-energy-catalyzer.html ) author Mario Menichella says:
“The modern history of cold fusion begins with the premature announcement made in the United States by the two electrochemical Martin Fleischmann and Stanley Pons, who in 1989 convened a press conference…there were numerous attempts to replicate (their) result, but for some years had little success, so that soon the question of cold fusion was labeled by the media and mainstream science as a “hoax.”
Menichella continues, “The probably better experimental work…carried out in Siena since the early Nineties, by a group of physicists composed by Sergio Focardi (University of Bologna), Francesco Piantelli (University of Siena), Roberto Habel (University of Cagliari), but it did not lead to a system capable of generating useful amount of excess energy for normal industrial or domestic applications. In Siena, in fact, the three scientists – using hydrogen and nickel as the two only “ingredients” of the reaction, plus an appropriate amount of heat supplied to the system – managed to get out a double thermal energy than the electrical energy provided in input.”
You may be wondering why the ebook is called “Secrets of E-Cat.” As you can see, LENR (otherwise loosely known as “cold fusion”) is a proven scientific phenomena, but the excess energy from this exothermic reaction was not large enough for normal industrial or domestic applications. In comes Andrea Rossi, the e-cat fusion developer, an Italian inventor who has a Masters Degree in Engineering from Milan University.
To quote the article “ANDREA ROSSI BIOGRAPHY – STORY”
( http://ecatfusion.com/e-cat/andrea-rossi-biography-the-e-cat-fusor-story ):
“In 2007, Andrea Rossi arrived at the very critical point in his research and concentrated his time on his invention. He also hired Sergio Focardi, a physicist from the University of Bologna who is an acknowledged expert in field. The physicist’s work on nickel hydrogen reactions proved to be invaluable…In 2009, Mr. Rossi introduced to the public a process and a device called the E-Catalyst. This is a revolutionary process in energy production and is also called low energy nuclear reactions. It could be a breakthrough invention since it can solve some of the energy problems of our planet.”
I recommend watching the video contained in this article titled “Nobel laureate touts E-Cat cold fusion” (http://pesn.com/2011/06/23/9501856_Nobel_laureate_touts_E-Cat_cold_fusion/ ). Dr. Brian Josephson, winner of the 1973 Nobel Prize in Physics, stars in the video whose stated purpose is to wake up the media to the E-Cat story, which has not been widely reported on in the mainstream media of the English-speaking world.
By the way, here is a article titled “The New Breed of Energy Catalyzers: Ready for Commercialization?” ( http://www.cleantechblog.com/2011/08/the-new-breed-of-energy-catalyzers-ready-for-commercialization.html ), which contains a relatively current survey of all the companies that are trying to bring LENR to commercialization.
The subject of LENR, a clean, very very cheap, and super abundant energy technology, is too deep to comprehensively cover in this limited space. Using only nickel and hydrogen, both very abundant and cheap, in a LENR exothermic reaction, could be a source of almost unlimited energy for humanity, with a cost close to nothing, and no environmental pollution. Hopefully the limited evidence for LENR cited above will go part of the way toward convincing an open minded reader of the validity of this too good to be true energy technology.
“Total replacement of fossil fuels for everything but synthetic organic chemistry.” –Dr. Joseph M. Zawodny, NASA
Illustration courtesy of Yufeng Wang and Yu Wang
Scientists have created new kinds of particles, 1/100th the diameter of a human hair, that spontaneously assemble themselves into structures resembling molecules made from atoms.
updated 11/1/2012 6:51:05 PM ET
Particles engineered to spontaneously self-assemble like atoms forming molecules could give rise to new high-tech materials, leading to better optical displays and faster computer chips, researchers say.
Scientists have crafted the new particles, which are 1/100th the diameter of a human hair, by altering the architecture of colloids, tiny particles suspended in liquids, and which can be found dispersed in everyday items such as paint, milk, glass and porcelain. The work is detailed this week in the journal Nature.
Engineers have been limited in their ability to manipulate these particles into new patterns that would form the building blocks of new materials because colloids stick to one another randomly; in science speak, they lack directional bonds, or bonds that prefer a specific orientation.
In an accompanying essay in the same issue of Nature, Northwestern University's Matthew Jones and Chad Mirkin describe the predicament of trying to make structures from these particles as "trying to assemble a bookcase from parts covered in glue that stick to each other equally well wherever they touch, regardless of their relative orientations," the material scientists wrote. "You would quickly find the task to be extremely challenging, because the components would keep joining together in haphazard configurations, rather than fitting neatly into their intended positions."
Image courtesy of Vinothan N. Manoharan and David J. Pine
These are electron microscope images of "colloidal atoms," micrometer-sized particles with patches that allow bonding only along particular directions. From left to right: particle with one patch (analogous to a hydrogen atom), two, three, four (analogous to a carbon atom), five, six, and seven patches.
To form new, complex molecular structures, chemists use atoms with directional bonds, which are necessary to control self-assembly and maintain structural integrity.
"Chemists have a whole periodic table of atoms to choose from when they synthesize molecules and crystals," study researcher Vinothan Manoharan of Harvard said in a statement. "We wanted to develop a similar 'construction set' for making larger-scale molecules and crystals."
The team created chemically distinct "patches" on the particles' surfaces that could form directional bonds, sticking to other particles in specific patterns to spontaneously form "colloidal molecules" of the researchers' design.
To ensure the patches interacted with other patches in specific ways, the scientists used single strands of DNA to create "sticky ends" to which particle patches adhered, placing up to seven patches on each particle.
The scientists say they could manipulate these bonds to create colloids of a specific color, size, chemical function or electrical conductivity. This, in turn, could lead to the production of new materials, such as photonic crystals to improve optical displays and boost the speed of computer chips.
  1. Science news from NBCNews.com
    1. Climate issue heats up after superstorm
      Science editor Alan Boyle's blog: The climate change issue has been virtually a non-issue during the presidential campaign — but it's primed to take a higher profile after the elections, in part due to Hurricane Sandy's horrific aftermath.
    2. How to cope with lab-animal tragedy
    3. Elephant can speak Korean — out loud
    4. Bulgaria claims to find Europe's oldest town
"What this means is we can make particles that attach only at the patches, and then we can program them so only specific kinds of particles attach at those patches," added another researcher involved in the study, David Pine, an NYU physics professor. "This gives us tremendous flexibility to design 3-dimensional structures."

Now, a way to ‘see’ through solid layers

1
PARIS: Scientists said on Wednesday they have developed a method to "see through" layers of thin, solid material in a breakthrough that holds promise for medical imaging, nanotechnology — and the spy trade. Still in its infancy, the technique using laser and computer decoding has allowed a team from the Netherlands and Italy to "see" an object behind a non-see-through barrier made of ground glass.

Using the same technology, they would also be able to look behind a sheet of paper or a thin layer of paint, said study co-author Allard Mosk of the Institute for Nanotechnology at the University of Twente in the Netherlands . With improvements, "20 years in the future I think we might have a device the size of an iPhone that you could hold on the scattering material (the non-see through layer) and you push a button or maybe speak a command ... and you'd be seeing what's behind it," the physicist said. Some objects, like paper, skin or frosted glass, let through limited light, but diffuse it so much that the human eye cannot see beyond them — like trying to see through fog.

The new method works by shining a laser on the barrier, in this case a translucent screen of ground glass made by an optics company. The disk does not allow any light to pass through in a straight line but scatters it all.

The diffused light that makes it through the glass then hits an object behind the screen, which returns some of that light onto the backside of the screen, the team wrote in the journal Nature . This light, by now completely scrambled and so low that it can no longer be seen by the naked eye, is then analysed by a computer decoding programme that reproduces an image of the hidden object, Mosk said.

"We don't see the object itself, we don't see its shape, but thanks to our scanning method all we really need to know is the amount of light," he explained. Decoding the light pattern "is like a huge puzzle and fortunately it's a puzzle of the type that computers are very good at." Mosk said the technology could be useful for non-invasive scanning in medicine and in the field of nanotechnology — seeing inside a computer chip without having to open